H. References

H. References

H.W. Schreier, D. Garcia and M.A. Sutton, "Advances in Stereo Light Microscopy", Experimental Mechanics, 44, 278-289, 2004.
M.A. Sutton, N. Li, D. Garcia, N. Cornille, J.J. Orteu, S.R. McNeill, H.W. Schreier and X. Li. "Metrology in a scanning electron microscope: theoretical developments and experimental validation", Measurement Science and Technology, 17, 2613–2622, 2006.
M.A. Sutton, N. Li, D.C. Joy, A.P. Reynolds and X.D. Li, "Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurement; Part I. SEM Imaging at Magnification from 200 to 10,000", Experimental Mechanics, 47, 775-788, 2007.
M.A. Sutton, N. Li, D. Garcia, N. Cornille, J.J. Orteu, S.R. McNeil, H.W. Schreier, X.D. Li , A.P. Reynolds, "Scanning Electron Microscopy for Quantitative Small and Large Deformation Measurements; Part II: Experimental Validation for Magnifications from 200 to 10000", Experimental Mechanics, 47, 789-804, 2007.
W.A. Scrivens, Y. Luo, M.A. Sutton, S.A. Collette, M.L. Myrick, P. Miney, P.E. Colavita, A.P. Reynolds and X.D. Li, "Development of Patterns for Digital Image Correlation Measurements at Reduced Length Scales", Experimental Mechanics, 47 , 63-79, 2007.
S. Ravindran, A. Kidane, "Meso-scale deformation behavior of polymer bonded energetic material under quasi-static compression", Society of experimental mechanics, accepted, to present, June, 2015.
S. Ravindran, A. Tessema and A. Kidane, "Meso-scale deformation behavior of polymer bonded energetic material under dynamic compression", Society of experimental mechanics, accepted, to present, June,2015
J. Zhou, Z. Gao, S. Allameh, E. Akpan, A. M. Cuitino, W. O. Soboyejo, "Multiscale Deformation of Open Cell Aluminum Foams," Mechanics of Advanced Materials and Structures, 12, 201–216, 2005.
G.F. Raiser, J.L. Wise, R.J. Clifton, D.E. Grady, D.E. Cox, "Plate impact response of ceramics and glasses", Journal of Applied Physics , 75, 3862, 1994.
M. Avalle, G. Belingardi, R. Montanini, "Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram", International Journal of Impact Engineering, 25, 455-472, 2001.
B. Song, W. Chen, "Dynamic stress equilibrium in split Hokinson pressure bar tests on soft materials", Experimental Mechanics, 44, 300, 2004.
F. Pierron, H. Zhu, C. Siviour, "Beyond Hopkinson's bar", Philosophical Transaction of the Royal Society A, 372, 2013195, 2014.
F. Pierron, P. Forquin, "Ultra-high-speed full-field deformation measurements on concrete spalling specimens and stiffness identification with the virtual fields method", Strain, 48, 388, 2012.
F. Pierron, H. Zhu, C. Siviour, Beyond Hopkinson's bar, Phil. Trans. R. Soc. A 2014 372, 20130195 …..repeated
S.W. Xu, X.M. Deng, V. Tiwari and M.A. Sutton, "An Inverse Analysis Approach for Pressure Load Identification", International Journal of Impact Engineering, 37, 865-877, 2010.
S.W. Xu, X.M. Deng, V. Tiwari, M.A. Sutton, "Identification of Interaction Pressure between Structure and Explosive with Inverse Approach", Experimental Mechanics, 51, 815–830, 2011.
L. J. Gibson, M. F. Ashby, "Cellular Solids: Structure and Properties", Cambridge University, Oxford, UK, 2nd edition, 1997.
G. Subhash, Q. Liu, "Quasi-static and dynamic crushability of polymeric foam in rigid confinement", International Journal of Impact Engineering, 36, 1303-1311, 2009.
M. Avalle, G. Belingardi, A. Ibba, "Mechanical models of cellular solids: Parameters identification from experimental tests", International Journal of Impact Engineering, 34, 3-27, 2007.
Q. Liu, G. Subhash, X. L. Gao, "A parametric study on crushability of open-cell structural polymeric foams", Journal of Porous Materials, 12, 233-248, 2005.
V.S. Deshpande, N.A. Fleck, "Isotropic constitutive models for metallic foams", Journal of the Mechanics and Physics of Solids, 48, 1253-1283, 2000.
K.Y. Jeong, S.S. Cheon, M. B. Munshi, A constitutive model for polyurethane foam with strain rate sensitivity, Journal of Mechanical Science and Technology, 26 , 2033-2038, 2012.
M.E. Kabir, M.C. Saha, S. Jeelani, "Tensile and fracture behavior of polymer foams", Materials Science and Engineering A, 429, 225–235, 2006.
E. Wang, N. Gardner, A. Shukla, "The blast resistance of sandwich composites with stepwise graded cores," International Journal of Solids and Structures, 46, 3492–3502, 2009.
N.J. Mills, H.X. Zhu, "The high strain compression of closed-cell polymer foams", Journal of Mechanics and Physics of Solids, 47, 669-695, 1999.
L. Marsavina, E. Linul, T. Voiconi, T. Sadowski.," A comparison between dynamic and static fracture toughness of polyurethane foams", Polymer Test, 32, 673-680, 2013.
W.Y Lu, M. Nielson, K. Connelly," In: Conference Proceedings of the Society for Experimental Mechanics Series", Greenville, SC, 2014.
Y. Liu, W. Gong, X. Zhang, "Numerical investigation of influences of porous density and strain rate effect on dynamical response of aluminum foams", Computational Material Science, 91, 223-230, 2014.
T.H. Kidd, S. Zhuang, G. Ravichandran, "In situ mechanical characterization during deformation of PVC polymeric foams using ultrasonics and digital image correlation", Mechanics of Material, 55, 82-88, 2012.
S. K. Samanta, "Dynamic deformation of aluminum and copper at elevated temperatures", Journal of Mechanics and Physics of Solids, 19, 117-122, 1971.
H. Meng, Q.M. Li, "Correlation between the accuracy of a SHPB test and the stress uniformity based on numerical experiments", International Journal of Impact Engineering, 28, 537-555, 2003.
B. Song, W. Chen. "Dynamic stress equilibriation in split Hokinson pressure bar tests on soft materials", Experimental Mechanics, 44, 300-312, 2004.
S. Aloui, R. Othman, A. Poitou, P. Guegan, S. El-Borgi, "Non-parametric identification of non-homogeneous stress in high strain rate uni-axial experiments" Mechanics Research Communication, 35, 392-397, 2008.
L.M. Yang, V.P.W. Shim, "An analysis of stress uniformity in split Hopkinson bar test specimens", International Journal of Impact Engineering, 31, 129-150, 2005.
R. Othman, S. Aloui, A. Poitou, "Identification of non-homogeneous stress fields in dynamic experiments with a non-parametric method", Polymer Test, 29, 616-623, 2010.
S.S. Sarva, S. Deschanel, M.C. Boyce, W. Chen, "Stress-strain behavior of a polyuria and a polyurethane from low to high strain rates", Polymer, 48, 2208-2213, 2007.
L.J. Gibson, M.F. Ashby. Cellular solids: Structure and properties. 2nd ed. Oxford. 1997..2x
N. Gupta, "A functionally graded synthetic foam material for high energy absorption under compression", Materials Letters, 61, 979-982, 2007.
G. Sun, G. Li, S. Hou, S. Zhou, W. Li, Q. Li, "Crashworthiness design for functionally graded foam-filled thin-walled structures", Materials Science and Engineering A, 527, 1911-1919, 2010.
L. Cui, S. Kiernan, M.D. Gilchrist, "Designing the energy absorption capacity of functionally graded foam materials", Materials Science and Engineering A, 507, 215-225, 2009.
X. Zhang, H. Zhang, "Optimal design of functionally graded foam material under impact loading" International Journal of Mechanical Sciences, 68, 199-211, 2013.
L. Wang, Y. Ding, L. Yang, "Experimental investigation on dynamic constitutive behavior of aluminum foams by new inverse methods from wave propagation measurements", International Journal of Impact Engineering, 62, 48-59, 2013.
S. Kiernan, L. Cui, M.D. Gilchrist, "Propagation of a stress wave through a virtual functionally graded foam", International Journal of Non-Linear Mechanics, 44, 456-468, 2009.
S. Mallon, B. Koobhor, A. Kidane, M. Sutton, "Fracture behavior of prestressed composites subjected to shock loading: a DIC-based study", Experimental Mechanics, 55, 211–225, 2015.
A. Kidane, A. Lashgari, B. Li, M. McKerns, M. Ortiz , H. Owhadi, G. Ravichandran, M. Stalzer, T.J. Sullivan, "Rigorous model-based uncertainty quantification with application to terminal ballistics, part I: Systems with controllable inputs and small scatter" Journal of the Mechanics and Physics of Solids, 60, 983-1001, 2012.
B. Li, A. Kidane, G. Ravichandran, M. Ortiz, "Verification and validation of the Optimal Transportation Meshfree (OTM) simulation of terminal ballistics", International Journal of Impact Engineering, 42, 25-36, 2012.
B. Li, A. Kidane, G. Ravichandran, M. Ortiz, 'The Optimal Transportation Mesh free Method for Ballistic Impact Simulation", IMPLAST 2010, SEM 2010 Fall Conference, Renaissance Providence Hotel, October 12-14, 2010 Providence, Rhode Island, USA.
S. Abotula , A. Kidane , V. B. Chalivendra , A. Shukla," Dynamic curving cracks in functionally graded materials under thermo-mechanical loading", International Journal of Solids and Structures, 49, 1637-1655, 2012.
A. Kidane, V. Chalivendra, A. Shukla, "Thermo-mechanical stress fields and strain energy associated with a mixed-mode propagating crack", Acta Mechanica, 215, 57-69, 2010.
A. Kidane, , V. B. Chalivendra, A. Shukla, R. Chona, "Mixed-mode dynamic crack propagation in graded materials under thermo-mechanical loading", Engineering Fracture Mechanics, 77, 2864-2880, 2010.
A. Kidane, A. Shukla, "Quasi-static and dynamic fracture initiation toughness of Ti/TiB layered functionally graded material under thermo-mechanical loading", Engineering Fracture Mechanics, 77, 479-491, 2010.
A. Kidane, A. Shukla, "Static and Dynamic Constitutive Behavior and Fracture of Titanium Based FGM Under Thermo-mechanical Loading", SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 1-4, 2009, Albuquerque, New Mexico, USA.
A. Kidane, A. Shukla, "Dynamic constitutive behavior of Ti/TiB FGM under thermo-mechanical loading", Journal of Materials Science, 43, 2771-2777, 2008.
S. Mallon, A. Kidane, W.Y. Lu, "Full-Field deformation Observation of Polymer Foam Subjected to Shock Loading, Dynamic Behavior of Materials", Conference Proceedings of the Society for Experimental Mechanics Series, 1, 83-89, 2015.
A. Kidane, G. Ravichandran, "Dynamic Fracture of Sandwich Core Foams", 26th ASC Annual Technical Conference (the Second Joint US-Canada Conference on Composites), September 26-28, 2011, Montreal, Canada.
A. Kidane, G. Ravichandran, "Static and Dynamic Failure and Fracture Behavior of Polymer Foam Core", 18th International Conference on Composite Materials, August 21-26, 2011, Jeju Island, Korea.
A. Kidane, G. Ravichandran, "Failure and Fracture Behavior of Brittle Polymer Foam", Experimental and Applied Mechanics, Conference Proceedings of the Society for Experimental Mechanics Series, Volume 6, 91-98, 2011.
A. Kidane, G. Ravichandran, "Failure behavior of foam core with cracks, notches and circular holes", 9th International Conference on Sandwich Structures ICSS 9, June 14-16, 2010, California Institute of Technology, Pasadena, California 91125, USA.
J. Yu and A. Kidane, Modeling of Functionally Graded Materials Containing Multiple Heterogeneities, Acta Mechanica, 225, 1931-1943, 2014.
A. Kidane, "On the Failure and Fracture of Polymer Foam Containing Discontinuities", ISRN Materials Science, 1–9, 2013.
J. Yu and A. Kidane, "Acoustic properties of composites containing multiple heterogeneities: micromechanics modeling", International Journal Theoretical and Applied Multiscale Mechanics, 2, 271 – 286, 2013.
B. Koohbor, A. Kidane, W.Y. Lu, "Investigation of the Dynamic Stress-Strain Response of Compressible Polymeric Foam Using an Inverse Analysis", Polymer Testing, Under review.
B. Koohbor, A. Kidane, W.Y. Lu, "Dynamic flow response of compressible materials subjected to shock loading", Society for Experimental Mechanics, Accepted, to be presented June, 2015.
S. Ravindran, A. Tessema, A. Kidane, M.A. Sutton, "Meso-scale deformation behavior of polymer bonded energetic material under dynamic compression", Society of Experimental Mechanics, Accepted, to be presented June, 2015.
A. Kidane, "A Novel 3D Full-Field Deformation Measurement at a Temperature Higher than 1000 0C", ASME 2014 International Mechanical Engineering Congress & Exposition, Montreal, Canada, November 14-20,2014.
A. Kidane, B. Koohbor, M. A. Sutton, "Thermo-Mechanical Properties of Metals at Elevated Temperatures", Society of Experimental Mechanics, Accepted, to be presented June, 2015.